 |
JH-3535IR6G42-T8A-940
LEDGUHON
| Quantity: | |
|---|---|
Features:
• Small size,SMD Package with ceramic substrate
• Lower thermal resistance, higher light efficiency
• Ceramic base with good heat conductivity to enlarge the lifespan
• Packages with Silicon,anti-UV, adaptable for a variety of harsh environments
• SMD Components suitable for reflow-soldering
• Multi color options, Red Green Blue White Yellow Ultraviolet(UV) Infrared(IR)
Data:
| Parameter | Symbol | Color | Min | Type | Max | Unit | Test Condition |
| Forward Voltage | VF | IR | 1.3 | 1.45 | 1.6 | V | IF=700mA |
| Power Dissipation | PO | IR | 940 | 942.5 | 945 | NM | IF=700mA |
| Wavelength | Wld | IR | 300 | 400 | 500 | mW | IF=700mA |
| Reverse Current | IR | ||||||
| Viewing Angle | 1/2 | 60 | Deg | IF=700mA | |||
| Recommend Forward Current | IF(rec) | IR | 700 | mA |
Static Electricity:
• Static electricity or surge voltage damages the Power SMD. It is recommended that a wristband or an anti-electrostatic glove be used when handling the LEDs.
• A tip soldering iron is requested to be grounded. An ionizer should also be installed where the risk of static.
• All devices, equipment, and machinery must be properly grounded (via 1MΩ). It is recommended that measures be taken against surge voltage to the equipment that mounts the Power SMD.
Features:
• Small size,SMD Package with ceramic substrate
• Lower thermal resistance, higher light efficiency
• Ceramic base with good heat conductivity to enlarge the lifespan
• Packages with Silicon,anti-UV, adaptable for a variety of harsh environments
• SMD Components suitable for reflow-soldering
• Multi color options, Red Green Blue White Yellow Ultraviolet(UV) Infrared(IR)
Data:
| Parameter | Symbol | Color | Min | Type | Max | Unit | Test Condition |
| Forward Voltage | VF | IR | 1.3 | 1.45 | 1.6 | V | IF=700mA |
| Power Dissipation | PO | IR | 940 | 942.5 | 945 | NM | IF=700mA |
| Wavelength | Wld | IR | 300 | 400 | 500 | mW | IF=700mA |
| Reverse Current | IR | ||||||
| Viewing Angle | 1/2 | 60 | Deg | IF=700mA | |||
| Recommend Forward Current | IF(rec) | IR | 700 | mA |
Static Electricity:
• Static electricity or surge voltage damages the Power SMD. It is recommended that a wristband or an anti-electrostatic glove be used when handling the LEDs.
• A tip soldering iron is requested to be grounded. An ionizer should also be installed where the risk of static.
• All devices, equipment, and machinery must be properly grounded (via 1MΩ). It is recommended that measures be taken against surge voltage to the equipment that mounts the Power SMD.
